SoapEquipment.com

Willow Way LLC - 12873 W. E. Oler Road, Hagerstown, IN 47346

Phone: 765-886-4640 * Fax: 765-886-4644

Copyright © 1996-2011 Willow Way, LLC. All rights reserved Worldwide - All prices and product availability subject to change without notice.

Print this page

Bottle Labeling Equipment

Benefits

Increase Production

You should expect production rates of about 15-20 units per minute (900-1200 per hour) with experience.

Save Time & Money

Less labor, Less cost per bottle. Label thousands of bottles a day with one person!

Increase Profit

Less labor and time means less cost per bottle-Equals More Profit!

Versatile

Label dimensions, can range from, 3/4" to 6 1/2" (19mm to 165mm) in width.

Applies pressure sensitive labels made of plastic, paper, Mylar, etc.

Related Products

Bottle Filler

Bottle Capper

Label Printer

Oil Heater

 Printer-Friendly Version

Click Image To Enlarge

HANDcraft Bottle Labeler

HANDcraft™ Labeler

by Willow Way

Check out our

Color Label Printer

Primera Color Label Printer

Print your own

Full Color Labels

Label Positioning

Label Position Chart

(Refer to the

"Label Instructions

for your Printer" section)

Label Feed Diagram HANDcraft SR Labeler

Label Feed Diagram

HANDcraft™ SR Labeler

 

Click Here for Bottle Filling Equipment

HANDcraft™ SR Bottle Labeler

HANDcraft by Willow Way Logo

Model: LAB1

HANDcraft™ SR Labeler

$1,749.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

The HANDcraft™ SR Labeler, will handle round containers up to 8" in diameter. You can expect production rates of 15 to 20 units per minute (900 to 1200 per hour), within a short time of using the Handcraft Labeler.

Description:

bullet

Easy to use and quick to set-up. Perfect for any round container from .15 ounce (4.4ml) lip balm tubes to gallon jugs.

bullet

Works perfectly with labels printed by our Primera Label Printer.

bullet

The HANDcraft™ SR Labeler can apply pressure sensitive labels to any container or package, as small as a 1/2" to as large as 8" (13mm to 200mm) in diameter.

bullet

The HANDcraft™ SR Labeler may have a small foot print, only 12" (30cm) wide x 24" (61cm) long, but it is certainly big on what it can accomplish.

bullet

Applies pressure sensitive labels made of plastic, paper, Mylar, etc.

bullet

Will handle label rolls up to 6 1/2" (165mm) in width and 12" (300mm) in diameter.

bullet

Uses standard, 3" (76mm) core label rolls, which can be Die Cut or Butt Cut.

bullet

Capable of applying single labels or front and back labels. Front and back labels require the purchase of the optional, HANDcraft™ gap guide. $60

Specifications:

bullet

Label dimensions, can range from, 3/4" to 6 1/2" (19mm to 165mm) in width.

bullet

The maximum roll width, with backing, is 6 1/2" (165mm). This is called, “Web Width” and is also the approximate label height, as it goes onto the container.

bullet

The Roll Core Size is, 3" (76mm) in diameter. This is the inside diameter of the paper core that the labels are wound onto.

bullet

The maximum overall, Label Roll Diameter is, 12" (300mm).

bullet

The HANDcraft™ SR Labeler weighs 16 lbs (7kg)

bullet

Construction ¼ “ milled Alcoa® aluminum on the main frame. Other materials include poly-propylene, acrylic, phenolic, brass, stainless steel and anodized aluminum.

Please Note:

bullet

If you are in doubt about a container or label it is best to send a sample to us, to verify.

bullet

Paper backing is best but the HANDcraft™ Labeler will work with any backing.

Label Instructions for your Printer:

bullet

Labels unwind from the bottom....Under - Over.

bullet

Label direction....Your printer will understand the standard label direction numbers below. You only need to tell them which number you prefer and that the labeler unwinds from the bottom.
bullet

#4: is best direction for a right handed person and a label running parallel to bottle. Bottom of bottle to left, neck to right. Left edge of label leading.

bullet

#3: is best direction for a left handed person and a label running parallel to bottle. Bottom of bottle to right, neck to left, Right edge of label leading.

bullet

#2: is best direction for a right handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to left, top to right. Top edge of label leading.

bullet

#1: is best direction for a left handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to right, top to left. Bottom edge of label leading.

Video-See Our Products in Action

View Video of the

HANDcraft™ JR Labeler

in Action!

Click Image To Enlarge

HANDcraft JR Bottle Labeler

HANDcraft™ JR Labeler

by Willow Way

Check out our

Color Label Printer

Primera Color Label Printer

Print your own

Full Color Labels

Label Positioning

Label Position Chart

(Refer to the

"Label Instructions

for your Printer" section)

Label Feed Diagram HANDcraft SR Labeler

Label Feed Diagram

HANDcraft™ JR Labeler

Check the Lip Balm & Vial Attachment
for Junior Labeler Below!

 

HANDcraft™ JR Bottle Labeler

HANDcraft by Willow Way Logo

Model: LAB2

HANDcraft™ JR Labeler

$1,149.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

The HANDcraft™ Junior Labeler, may sound light weight but it is definitely not. He is just smaller in stature. Junior can handle round containers up to 4" (102mm) in diameter and you can expect production rates of 15 to 20 units per minute (900 to 1200 per hour).

Description:

bullet

Easy to use and quick to set-up. Perfect for any round container from .15 ounce (4.4ml) lip balm tubes to quart and liter bottles.

bullet

Works perfectly with labels printed by our Primera Label Printer.

bullet

The HANDcraft™ Junior Labeler, can apply pressure sensitive labels to any container or package, as small as a 1/2" to as large as 4" (13mm to 102mm) in diameter.

bullet

The HANDcraft™ Junior Labeler may have a small foot print, only 11" (28cm) x 18" (46cm) long, but it is certainly big on what it can accomplish.

bullet

Applies pressure sensitive labels made of plastic, paper, Mylar, etc.

bullet

Will handle label rolls up to 5" (127mm) in width and 8" (203mm) in diameter.

bullet

Uses standard, 3" (76mm) core label rolls, which can be Die Cut or Butt Cut.

bullet

Also capable of applying front and back labels. Front and back labels require the purchase of the optional, HANDcraft™ gap guide. $60

bullet

Application speeds for single labels, 15 to 20 per minute, for front and back labels, 6 to 8 per minute.

Specifications:

bullet

Label dimensions, can range from, 1/2" to 5" (13mm to 127mm) in width.

bullet

The maximum roll width, with backing, is 5" (127mm). This is called, “Web Width” and is also the approximate label height, as it goes onto the container.

bullet

The Roll Core Size is, 3" (76mm) in diameter. This is the inside diameter of the paper core that the labels are wound onto.

bullet

The maximum overall, Label Roll Diameter is, 8" (203mm).

bullet

The HANDcraft™ Junior Labeler weighs 9 lbs (4kg)

bullet

Construction; 12 gauge, 50-52, Alcoa® aluminum unibody construction on main body. Other materials include polypropylene / acrylic / phenolic / brass/ stainless steel.

Please Note:

bullet

If you are in doubt about a container or label it is best to send a sample to us, to verify.

bullet

Paper backing is best but the HANDcraft™ Junior Labeler will work with any backing.

Label Instructions for your Printer:

bullet

Labels unwind from the bottom....Under - Over.

bullet

Label direction....Your printer will understand the standard label direction numbers below. You only need to tell them which number you prefer and that the labeler unwinds from the bottom.
bullet

#4: is best direction for a right handed person and a label running parallel to bottle. Bottom of bottle to left, neck to right. Left edge of label leading.

bullet

#3: is best direction for a left handed person and a label running parallel to bottle. Bottom of bottle to right, neck to left, Right edge of label leading.

bullet

#2: is best direction for a right handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to left, top to right. Top edge of label leading.

bullet

#1: is best direction for a left handed person and a label running right angles to container as in a lip balm tube, Bottom of tube to right, top to left. Bottom edge of label leading.

Benefits

Increase Production

You should expect production rates of about 15-20 units per minute (900-1200 per hour) with experience.

Save Time & Money

Less labor, Less cost per bottle. Label thousands of bottles a day with one person!

Increase Profit

Less labor and time means less cost per bottle-Equals More Profit!

Versatile

Label dimensions, can range from, 1/2" to 5" (13mm to 127mm) in width.

Applies pressure sensitive labels made of plastic, paper, Mylar, etc.

Related Products

Bottle Filler

Bottle Capper

Label Printer

Oil Heater

Lip Balm & Vial Attachment for Junior Labeler

HANDcraft by Willow Way Logo

Model: LAB2lip

Lip Balm & Vial Attachment for Junior Labeler

$346.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

Label any round tube, vial or container, as small as ¼” (7mm). This easy to setup attachment, converts our Junior Labeler into the perfect Lip Balm Labeler.

Description:

bullet

Ideal for labeling tiny containers from ¼” (7mm) to 1 ½” (38mm).

bullet

Easy setup that only takes a few minutes.

bullet

Works great with our Safety Seal, Lip Balm Labels.

 

Click Images To Enlarge

HANDcraft 360 Bottle Labeler

HANDcraft™ 360 Labeler

HANDcraft 360 Bottle Labeler

Check out our

Color Label Printer

Primera Color Label Printer

Print your own

Full Color Labels

Label Positioning

Label Position Chart

(Refer to the

"Label Instructions

for your Printer" section)

Label Feed Diagram HANDcraft 360 & 362 Labelers

Label Feed Diagram for

HANDcraft™ 360 & 362 Labelers

HANDcraft™ 360 Bottle Labeler

HANDcraft by Willow Way Logo

Model: HANDcraft 360

HANDcraft™ 360 Labeler

100/115 VAC (North America/Japan plug)

$1,495.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

Model: HANDcraft 360E

HANDcraft™ 360E Labeler

(Front-only labeling), 230 VAC (Euro-style plug)

$1,495.00 ea
Click here to add this item to your Shopping Cart!
Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

HANDcraft™ 360 Label Applicators are the perfect semi-automatic labeling solution for cylindrical containers as well as many tapered containers, including bottles, cans, jars and tubes.

Set-up and operation is fast and easy. Just:

bullet

Set the guides

bullet

Place your bottle or other container in the machine

bullet

Press the footswitch and your label is applied
The built-in spring-loaded pressure arm makes sure labels are applied firmly and without wrinkles.

bullet

With a HANDcraft™ 360 Label Applicator you’ll apply labels faster and more accurately – helping to speed up your production and sell more of your products!

Description:

Apply Labels Fast and Accurately

With a HANDcraft™ 360 Labeler you’ll be able to apply labels at speeds of up to 1200 per hour. Labels are perfectly applied without wrinkles, giving your finished products a highly professional look.

HANDcraft™ 360 Label Applicator is an ideal accessory to our LX-810 label printers. The applicator can also apply roll-fed, pressure-sensitive labels produced by most other flexographic, offset and digital presses.

HANDcraft™ 360 is the base model. It quickly and efficiently applies single labels at a time.

HANDcraft™ 362 (See Below) is an advanced model. It can apply one or two different labels to a single container. A built-in LED counter and memory for up to nine front-to-back label offsets is also included.

Features:

bullet

Quick set-up and easy operation

bullet

Accurately applies labels to the front (HANDcraft™ 360) or front and back (HANDcraft™ 362) with variable spacing

bullet

Fast – labels are applied at 5.3” (135mm) per second – up to 1200 containers per hour

bullet

Compact size – fits on most desks and countertops

bullet

Professionally designed – one of the only semi-automatic labelers available with UL, CSA and FCC safety and emissions certifications

bullet

Industrial strength – built with heavy-duty sheet metal and steel for long life

Specifications:

bullet

Container Width: 1” to 9.4” (25.4mm to 238mm)

bullet

Container Diameter: 0.6” to 6.7” (15mm to 170mm)

bullet

Container Shape: Cylindrical and many tapered

bullet

Supply roll diameter: Up to 8” (203mm)

bullet

Media liner width: 1” to 8.375” (25.4mm to 213mm)

bullet

Supply roll core: 2” to 3” I.D. (51.8mm to 76.2mm)

bullet

Electrical rating: 12VDC, 5.0A

bullet

Power requirements: 100-240VAC, 50/60 Hz, 60 watts

bullet

Agency certifications: UL, UL-C, CE, FCC Class A

bullet

Weight: 16 lbs. (7.26 kg)

bullet

Dimensions: 13.4”W x 8.9”H x 12.9”D (340mmW x 226mmH x 328mmD)

Benefits

Quick set-up and easy operation


Accurately applies labels to the front (AP360) or front and back (AP362) with variable spacing


Fast – labels are applied at 5.3” (135mm) per second – up to 1200 containers per hour


Compact size – fits on most desks and countertops


Professionally designed – one of the only semi-automatic label applicators available with UL, CSA and FCC safety and emissions certifications


Industrial strength – built with heavy-duty sheet metal and steel for long life

Related Products

Bottle Filler

Bottle Capper

Label Printer

Oil Heater

Click Images To Enlarge

HANDcraft 362 Bottle Labeler

HANDcraft™ 362 Labeler

HANDcraft 362 Labeler

Check out our

Color Label Printer

Primera Color Label Printer

Print your own

Full Color Labels

Label Positioning

Label Position Chart

(Refer to the

"Label Instructions

for your Printer" section)

Label Feed Diagram HANDcraft 360 & 362 Labelers

Label Feed Diagram for

HANDcraft™ 360 & 362 Labelers

HANDcraft™ 362 Bottle Labeler

HANDcraft by Willow Way Logo

Model: HANDcraft 362

HANDcraft™ 362 Labeler

100/115 VAC (North America/Japan plug)

$1,795.00 ea

Click here to add this item to your Shopping Cart!

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

Model: HANDcraft 362E

HANDcraft™ 362E Labeler

(Front-only labeling), 230 VAC (Euro-style plug)

$1,795.00 ea
Click here to add this item to your Shopping Cart!
Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

HANDcraft™ 362 Label Applicators are the perfect semi-automatic labeling solution for cylindrical containers as well as many tapered containers, including bottles, cans, jars and tubes.

Set-up and operation is fast and easy. Just:

bullet

Set the guides

bullet

Place your container in the machine

bullet

Press the footswitch and your label is applied
The built-in spring-loaded pressure arm makes sure labels are applied firmly and without wrinkles.

bullet

With a HANDcraft™ 362 Labeler you’ll apply labels faster and more accurately – helping to speed up your production and sell more of your products!

Description:

Apply Labels Fast and Accurately

With a HANDcraft™ 362 Label Applicator you’ll be able to apply labels at speeds of up to 1200 per hour. Labels are perfectly applied without wrinkles, giving your finished products a highly professional look.

HANDcraft™ 362 Label Applicator is an ideal accessory to our LX-810 label printers. The applicator can also apply roll-fed, pressure-sensitive labels produced by most other flexographic, offset and digital presses.

Features:

bullet

Quick set-up and easy operation

bullet

Accurately applies labels to the front (HANDcraft™ 360) or front and back (HANDcraft™ 362) with variable spacing

bullet

Fast – labels are applied at 5.3” (135mm) per second – up to 1200 containers per hour

bullet

Compact size – fits on most desks and countertops

bullet

Professionally designed – one of the only semi-automatic labelers available with UL, CSA and FCC safety and emissions certifications

bullet

Industrial strength – built with heavy-duty sheet metal and steel for long life

Specifications:

bullet

Container Width: 1” to 9.4” (25.4mm to 238mm)

bullet

Container Diameter: 0.6” to 6.7” (15mm to 170mm)

bullet

Container Shape: Cylindrical and many tapered

bullet

Supply roll diameter: Up to 8” (203mm)

bullet

Media liner width: 1” to 8.375” (25.4mm to 213mm)

bullet

Supply roll core: 2” to 3” I.D. (51.8mm to 76.2mm)

bullet

Electrical rating: 12VDC, 5.0A

bullet

Power requirements: 100-240VAC, 50/60 Hz, 60 watts

bullet

Agency certifications: UL, UL-C, CE, FCC Class A

bullet

Weight: 16 lbs. (7.26 kg)

bullet

Dimensions: 13.4”W x 8.9”H x 12.9”D (340mmW x 226mmH x 328mmD)

Benefits

Quick set-up and easy operation


Accurately applies labels to the front (AP360) or front and back (AP362) with variable spacing


Fast – labels are applied at 5.3” (135mm) per second – up to 1200 containers per hour


Compact size – fits on most desks and countertops


Professionally designed – one of the only semi-automatic label applicators available with UL, CSA and FCC safety and emissions certifications


Industrial strength – built with heavy-duty sheet metal and steel for long life

Related Products

Bottle Filler

Bottle Capper

Label Printer

Oil Heater

Click Image To Enlarge

Willow Way Pro Bottle Labeler

Pro Bottle Labeler

Check out our

Color Label Printer

Primera Color Label Printer

Print your own

Full Color Labels

Label Positioning

Label Position Chart

(Refer to the

"Label Instructions

for your Printer" section)

Willow Way Pro Bottle Labeler

HANDcraft by Willow Way Logo

Model: PROLAB

Willow Way Pro Bottle Labeler

(See Note Below)

$2,780.00 ea

Contact Us To Order

Click here to add this item to your WishList!
Click here to e-mail a friend about this item!

Note:

These items are made to order therefore cannot be added to our cart, for Bottle Labeler orders, Contact Us.

Willow Way Pro Bottle Labeler will handle round containers up to 7” in diameter. You should expect production rates of about 7-8 per minute (420 per hour) starting out and with experience up to 15 or more (900 per hour) with experience.

Description:

bullet

Bench Top semi-automatic labeler and dispenser of pressure sensitive labels

bullet

Container diameter can range from 3/4" to 7" (19mm to 178mm)

bullet

Can be set up to do multiple size containers and labels.

bullet

Applies pressure sensitive labels made of plastic, paper, Mylar, etc., to round containers and packages.

bullet

Foot switch initiates each single cycle label application. Up to 15 label applications can be completed per minute.

bullet

Labels can be Die Cut or Butt Cut.

Specifications:

bullet

Label dimensions can range from, 1/2" to 5" (13mm to 127mm) in width and from 1 1/4" to 15" (32mm to 381mm) in length.

bullet

The maximum width with backing for the label, this is called, “Web Width”, is 5" (127mm)

bullet

The Roll Core Size is 3" (76mm) in diameter

bullet

The maximum Roll Diameter is 10" (254mm) with a 3" (76mm) web width, and 8" (203mm) maximum with a 5" (127) web width.

Please Note:

bullet

If you are in doubt about a container or label it is best to send a sample to us, to verify.

bullet

It is important to have a good paper backing for the labels. This will make application much easier for the labeler. The thicker the backing the better, no serrated backing, that may separate or tear easily.

bullet

Avoid backing with Mylar or plastic.

Benefits

Increase Production

You should expect production rates of about 7-8 per minute (420 per hour) starting out and with experience up to 15 or more (900 per hour) with experience.

Save Time & Money

Less labor, Less cost per bottle. Label thousands of bottles a day with one person!

Increase Profit

Less labor and time means less cost per bottle-Equals More Profit!

Versatile

Label dimensions can range from, 1/2" to 5" (13mm to 127mm) in width and from 1 1/4" to 15" (32mm to 381mm) in length.

Container diameter can range from 3/4" to 7" (19mm to 178mm)

Related Products

Bottle Filler

Bottle Capper

Label Printer

Oil Heater

 Lip Balm Labels with Safety Seal

Here is “THE” perfect label for your Round and Oval Lip Balm Tubes. Ideal for your, .15 ounce (4.25g) lip balm tubes.

Water Resistant | Safety Seal | Full Wrap | Economical

Click To Enlarge

Lip Balm Labels with Safety Seal

Lip Balm Tubes

Printed Labels

Click To Enlarge

Lip Balm Labels with Safety Seal

Close Up

Description:

bullet

These are quality, High Gloss labels with excellent water resistance and adhesion.

bullet

And the best part…..they are only 3.9 cents apiece. There are “1200” labels per roll !!

bullet

The dimensions of our, Safety Seal - Lip Balm Label is, 2 1/8” x 2 1/8” (54mm x 54mm). This gives you a “Full Wrap” around the tube.

bullet

They work wonderfully with our Primera Printer.

bullet

They also work with any one of our Labelers.

bullet

The Safety Seal covers, ¼” (21mm) of the top and is easily removed with a twist of the wrist.

bullet

You may wonder if these have to be used in our printer….the answer is, no. You could actually set up and run 3 or 4 at a time in a regular printer. They may not be water resistant due to the ink you are using and there is going to be some alignment issues with your printer. Sorry no help on this but your printers help menu may have some answers.

Model: LBlab - Lip Balm Label with Safety Seal - 1,200 Labels Per Roll

$46.80

Click here to add this item to your Shopping Cart!
[includesPricing/BottleLabelingPricing.htm]